SWIT Electronics M-1071F 2x 7" HD/SD-SDI/HDMI/CVBS Waveform LCD Monitor
= $3,079.00 + N.A.
Availability: Pre Order Product status: New
Offer updated on 6/25/2022
<b> 7-inch 1024x600 LCD - FFS panel with LED backlight </b> The M-1071F is made of 2x 7-inch FFS (Fringe field switching) LCD panel, with 1024x600 resolution and LED backlight, 400cd/m2 brightness and 900:1 contrast. The viewing angle is Horizontal: 160deg. / Vertical: 160deg. • 2x 7" FFS LCD Panel with LED backlight• 19-inch 3U standard rack mounting• 1024x600, 900:1 contrast, H/V 160deg. angle• 16:9 display area with 4:3 adjustment• Under scan / Over scan, safe area• HD/SD-SDI, HDMI, CVBS input• Build-in HDMI to SDI conversion output• Waveform (Y/Cb/Cr/R/G/B), with full scale• Vector scope, RGB histogram• Peaking focus assist (red/blue switch)• Embedded audio meter (SDI 16-ch, HDMI, 2-ch)• Real time video zoom-in and flip• SDI timecode display• False color, Blue only, Zebra stripes, Internal colorbar• 3-color TALLY light <b> Multi-format Input/output - SDI / HDMI / CVBS / HDMI-SDI </b> • Each LCD of M-1071F monitor supports: • HD/SD-SDI input x 2 • HD/SD-SDI loop output x 2 • HDMI input x 1 • HDMI loop output x 1 • HDMI input converted to SDI output x 1 • CVBS input x 1 <b> Build-in HDMI to SDI Conversion </b> The build-in conversion is used to broadcast and deliver the HDMI camera video. It's same format conversion and supports the following HDMI formats: 480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98) <b> Video Analysis Assistant Pattern - Waveform / Vector scope / Histogram </b> M-1071F supports Waveforms display under both SDI and HDMI, including Y, Cb, Cr, R, G, B channels and full scale display of each channel. The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms. <b> Embedded Audio Monitoring - HDSDI: 16-Ch; SDSDI/HDMI: 2-ch </b> The monitor displays SDI and HDMI embedded audio level meters and supports full 16-ch meters under HDSDI input; 2-ch meters under SDSDI and HDMI input. The audio meter is green and will turn yellow when exceeds -20dB and turn red when exceeds -9dB. The ch-1 and ch-2 embedded audio can be output via 3.5mm headphone socket. <b> Focus Assist </b> Under focus assist mode, the in-focused subject will be sketched out by red or blue lines. The focus assist is also available during the image zoom-in. <b> Safe Area and Scale Marker </b> You can select the scale of safe area frame from 80%, 85%, 90% and 95% in the menu system. And under HD input, the monitor can display a center 4:3 marker, to help composition the image when using HD recording while SD broadcasting. <b> Power Supply </b> M-1071F provides a 4-pin XLR socket of DC 6.5-17V power input, for the both 2 screens and an AC-DC adaptor is attached on the rear panel of the monitor. <b> 3-color TALLY Light - DB-9 input signal </b> There are front TALLY lights...
Promo code
No promo code available for this item.
Hostname: dc1-fe-kelkoo-03 Version: 2.2.39