RockJock CE-9112NP-14 Narrow Johnny Joint Rod End Externally Greased - 1.600 x .625 in. Ball

$71.60 (inc P&P)

Features and technical details

<p>RockJock's narrow weld-on Johnny Jointfor fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180" wall machined DOM tubing, fitted with a zerk fitting for greasing. This specific joint is a 2" o.d. narrow body and features a 1.600" mounting width and a .625" thru bolt hole. </p><b>Specifications</b><ul><li><b>Body Type:</b> Weld-on</li><li><b>Body Series:</b> 2 inch OD, Narrow Body</li><li><b>Body Width:</b> 1.2 inches</li><li><b>Mount Width:</b> 1.600 inches</li><li><b>Hole Diameter:</b> .625 inch (5/8)</li><li><b>Misalignment:</b> 22&deg; Total</li><li><b>Lubrication Method:</b> External zerk fitting located on joint body</li><li><b>Country of Origin:</b> United States of America</li></ul>
Similar products might interest you